Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Headlining Panel from a Volkswagen Golf

Model: Volkswagen Golf MK 3, Golf III, Golf 3 - Years: 1991, 1992, 1993, 1994, 1995, 1996, 1997

See other generations:
Video tutorial

How do we remove the headlining from a Volkswagen Golf? This guide will show you how to proceed. Remove the side handles of the headlining using a screwdriver, then remove the sun visors and the overhead lighting unit located in the panel.

Once all the panel support brackets are removed, detach the clips of the headlining around the perimeter of the car roof. Once the panel is free from fastenings, you can pull it out from the boot of the car. Be careful when pulling it out of the car as it may break at the corners.

Finally, reassemble the new panel starting in reverse order.


Updated on 25 February 2026 by ScegliAuto


Related tutorials

How to Remove the Roof Panel of a VW Golf
How to Remove the Roof Panel of a VW Golf
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) How do you remove the roof panel of a Volkswagen Golf? Follow these steps. Start by removing the side handles of the headlining with a screwdriver, t…
How to Remove the Roof of a Golf 6
How to Remove the Roof of a Golf 6
Volkswagen Golf (2008-2012 / Golf 6, MK 6, 5K1, Golf VI) How do you remove the car roof? Disassemble the roof panel to replace the damaged lining? Let's look at the disassembly process on a Golf. Remove the…
How to Remove the Headlining on a Volkswagen Golf
How to Remove the Headlining on a Volkswagen Golf
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) To remove the headlining on a Volkswagen Golf, start by unscrewing the side handles with a screwdriver. Next, remove the sun visors and the overhead …

    Frequently Asked Questions

    • Golf 2008-2012 - How do you use the emergency boot release on a Volkswagen Golf 6? Read answer

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos