Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Rear Light on a Passat

Model: Volkswagen Passat B7 - Years: 2010, 2011, 2012, 2013, 2014
Part: Tail light

See other generations:
Video tutorial

Want to remove the rear light on a Volkswagen Passat? Follow these steps in the video. Open the boot lid and locate the inspection covers for the rear lights on the internal lining of the boot.

Use a socket wrench to remove the nuts from the light's mounting stud and disconnect it from the car's body. Disconnect the terminals from the bulb holder and extract the bulb if damaged.

Install the new bulb in the bulb holder (always ensure the correct type and size), then insert the rear light into the metal housing. Finally, close the lights with the inspection covers.


Updated on 25 February 2026 by ScegliAuto


Related tutorials

Volkswagen Passat (2005-2010 / B6, 3C) Remove the rear light of a Volkswagen Passat to replace the damaged bulbs. Open the boot lid and use a lever to remove the plastic cover of the rear …
Volkswagen Passat (2010-2014 / B7) In this brief guide, we will provide instructions for removing the rear light and replacing the stop bulbs on a Volkswagen Passat. First, open the bo…
Volkswagen Passat (2005-2010 / B6, 3C) Today's instructions will show you how to remove and replace the rear light bulbs of the Volkswagen Passat. First, open the boot lid and start by rem…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Guide to replacing the 12V battery on the Toyota Yaris Cross

Today, we will go through the main instructions to remove and replace the 12V battery on the Toyota Yaris Cross. First, open the right rear door of the vehicle and start by removing the plastic cover located under the seat in the corner. You will find the battery inside, where you will disconnect both battery terminals (positive and negative), as shown in the video. Now, remove and replace the battery with a new one of the correct type and the same amperage; then, reinstall the battery and finally the plastic cover.

Watch the video!


by ScegliAuto

More videos