|
Do it yourself
| |||
| ||||
How do you reset the tire pressure warning light on the Volkswagen Transporter?
Model: Volkswagen Transporter
MK 6, T6
- Years 2014-2025
In order to reset the tire pressure warning light on the Volkswagen Transporter, you need to inflate the tires until they reach the correct pressure value: this value is indicated on the sticker attached to the driver's side door pillar. Once the tires are inflated, you can go inside the cabin and connect a diagnostic tool to the vehicle's OBD port: once the scanner is connected, you need to follow the instructions in the tutorial to make the warning light disappear from the instrument panel.
Posted on 2 August 2024 by ScegliAuto
Video tutorial
Related tutorials
Volkswagen Transporter
(2003-2014 /
T5, MK 5)
The following steps will show us how to reset the tire pressure monitoring system (TPMS) light on the Volkswagen Transporter; before performing the r…
Volkswagen Transporter
(2014-2025 /
MK 6, T6)
The reset of the tire pressure warning light on the Volkswagen Transporter is done by inflating the tires to the correct inflation pressure: this val…
Volkswagen Transporter
(2014-2025 /
MK 6, T6)
In order to reset the tire pressure warning light on the Volkswagen Transporter, you need to go inflate the tires, bringing them to the recommended p…
Other guides you may be interested in
|
Installation of Upgraded Intercooler Radiator with Pipes
Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.060
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
