Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Disable the Immobiliser in an Emergency for a Volvo S40

Model: Volvo S40 MK 2 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Checks and maintenance

See other generations:
Video tutorial

Here are the instructions that will allow you to disable the immobiliser of the Volvo S40 in case of emergency or malfunction. First, get inside the vehicle and start disconnecting the electrical connector located near the steering column, as well as above the pedals; then turn on the instrument panel and check the engine ignition by inserting the key, as shown in the video.

This way, you will have bypassed the immobiliser, allowing the ignition; proceed with the repair, consulting an authorised workshop if necessary.


Updated on 22 October 2026 by ScegliAuto


Related tutorials

How to Disable the Immobiliser on the Volvo S40
How to Disable the Immobiliser on the Volvo S40
Volvo S40 (2004-2012 / MK 2) This brief guide provides the main instructions on how to deactivate the electronic immobiliser of the Volvo S40 by following these simple steps. To …
How to Reset the Engine Warning Light on the Volvo S40
How to Reset the Engine Warning Light on the Volvo S40
Volvo S40 (1995-2004 / MK 1) In this brief guide, we will see the instructions to reset the engine warning light on the Volvo S40. First, get inside the cabin and start the ignit…
What is the Fuse Diagram for the Volvo S40?
What is the Fuse Diagram for the Volvo S40?
Volvo S40 (2004-2012 / MK 2) In this video, we can see where the fuse boxes are located in the Volvo S40 and their respective diagrams, to consult if you need to check the fuses …

    Frequently Asked Questions

    • S40 1995-2004 - Why does the Volvo S40 not start? Read answer

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos