Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the parking light bulbs of the Volvo V40

Model: Volvo V40 MK 2 - Years 2012-2019
Part: Tail light

In this video we see how to replace the rear light bulb of the Volvo V40: we need to open the rear trunk and look for, on the side where we need to intervene, a removable panel embedded in the carpet lining. Once removed, we can access the back of the light cluster, removing the electrical cable and the bulb holder of the lamp we are interested in: stop, reverse or turn signal. Always remember, when changing the new bulb, never touch the bulb with bare hands, as this would significantly shorten its life. Once the operation is done, close the panel, and the job is finished.

Posted on 16 October 2024 by ScegliAuto

Video tutorial

Related tutorials

Where are the fuses located in the Volvo V40?
Where are the fuses located in the Volvo V40?
Volvo V40 (2012-2019 / MK 2) In the Volvo V40, the fuses are divided among three fuse boxes installed in the vehicle. The first of these is located below the glove compartment on…
How to replace the bulbs in the ceiling light of the Volvo V40?
How to replace the bulbs in the ceiling light of the Volvo V40?
Volvo V40 (2012-2019 / MK 2) In this tutorial, we can see how to replace the bulbs of the ceiling light in the Volvo V40, a very simple and quick operation. First of all, make su…
How to Replace the Front Headlamp Bulb on a Volvo V40
How to Replace the Front Headlamp Bulb on a Volvo V40
Volvo V40 (2012-2019 / MK 2) To replace the front headlamp bulb on a Volvo V40, open the bonnet to access the screws securing the headlamp unit from the top: once these screws ar…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos