Do it yourself
Frequently asked questions about cars and motorcycles

How to reset the tire pressure warning on the Volvo XC60

Model: Volvo Xc60 MK 1 - Years 2008-2016
Part: Service warning light

Today's step-by-step instructions will guide us through the process of resetting the regular maintenance (service) reminder of the Volvo XC60. First, we get into the car and start the instrument panel, while holding down the button located on the right side of the instrument panel; then we wait for the inspection reminder to be completely reset, also resetting the maintenance key and consequently the service light, as shown in the video. At this point, we turn off the instrument panel and remove the key, then start the engine and verify the correct resetting of the maintenance reminder!

Posted on 7 November 2024 by ScegliAuto

Video tutorial

Related tutorials

Volvo Xc60 (2008-2016 / MK 1) In a few simple steps, we will see the process of resetting the tire pressure warning of the Volvo XC60; before resetting the TPMS sensors, it is nec…
Volvo Xc60 (2008-2016 / MK 1) It will be possible to completely delete the tire pressure warning light that is shown on the instrument panel of the Volvo XC60 by turning on the in…
Volvo Xc60 (2008-2016 / MK 1) In this tutorial, you will learn how to set the time in a Volvo XC60, a very simple and quick task to perform after disconnecting the battery or when…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos