Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the gear knob on a Volvo C30

Model: Volvo C30 MK 1 - Years 2006-2013
Part: Shift knob

How do you change the gear knob on a Volvo C30? We see it in this video, bearing in mind that the same procedure is also suitable for the S40, V50, and C70 models. First, put the gear in neutral, then lever from the passenger side on the gear lever boot; then press the gear lever, rotating it counterclockwise at the same time. By doing so, we can remove both the boot and the knob with a single gesture. We will use the reverse method to put it back in place, so we will press firmly and rotate clockwise at the same time. At this point, it will be enough to put the edges of the boot back in place and the job will be done.

Posted on 19 February 2025 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the gear shift knob of the Volvo C30
Replacement of the gear shift knob of the Volvo C30
Volvo C30 (2006-2013 / MK 1) Today's information will show us the steps on how to disassemble and replace the gear shift knob of the Volvo C30. First, we get on board the vehicle…
How to Remove the Gear Knob on Volvo C30 S40 V50 C70
How to Remove the Gear Knob on Volvo C30 S40 V50 C70
Volvo C30 (2006-2013 / MK 1) In this video tutorial, learn how to remove and replace the gear knob on various Volvo models, including the C30, S40, V50, and C70 (manual gear knob…
Removing and Replacing the Gear Knob on the Volvo C30
Removing and Replacing the Gear Knob on the Volvo C30
Volvo C30 (2006-2013 / MK 1) Here are the main instructions to remove and replace the gear knob on the Volvo C30, following these simple steps. First, get in the vehicle and put …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos