Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

When should the timing belt be changed in the Volvo V40 d2?

Model: Volvo V40 MK 2 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Timing belt

See other generations:
Video tutorial

Listening to the expert's advice, inside the video uploaded above, we can learn how to check the timing belt of a car, in this case a Volvo V40 d2. In addition to respecting the deadlines set by the manufacturer, which are 150,000 kilometers traveled or every 10 years, it is always good to periodically check the aforementioned belt, as it could become hardened, damaged, etc. before the expected time, risking a sudden break and serious and probably irreversible damage to the engine.

All the useful information on this topic can be found in the vehicle's user manual.


Posted on 31 March 2025 by ScegliAuto


Related tutorials

How do you replace the timing belt of the Volvo V40?
How do you replace the timing belt of the Volvo V40?
Volvo V40 (2012-2019 / MK 2) In order to replace the timing belt of the Volvo V40, you need to loosen the screws that secure the right front wheel to its housing: this must be re…
How to Replace the Timing Belt in a Volvo V40?
How to Replace the Timing Belt in a Volvo V40?
Volvo V40 (2012-2019 / MK 2) The timing belt in a Volvo V40 can be replaced by opening the bonnet to access the components located within the engine compartment: on the left side…
How to Replace the Timing Belt on a Volvo V40?
How to Replace the Timing Belt on a Volvo V40?
Volvo V40 (2012-2019 / MK 2) To replace the timing belt on a Volvo V40, open the bonnet to access the components located inside the engine bay. On the left side, remove obstructi…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos