Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to replacing the timing belt of the Volvo V40 2.0L

Model: Volvo V40 MK 1 - Years 1995-2012
Part: Timing belt

Today we will see the main instructions that will allow us to disassemble and replace the timing belt of the Volvo V40 2.0L. First, we open the hood of the car and start by disconnecting and removing the V-belt; then we lift the car and remove the right front wheel, unscrewing the central bolt of the crankshaft pulley to remove it, as shown in the video. At this point, we remove the timing cover, taking the necessary references for the replacement of the timing belt; we install the new original one, following the video tutorial until the end!

Posted on 12 February 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Timing Belt on a Volvo V40
How to Replace the Timing Belt on a Volvo V40
Volvo V40 (2012-2019 / MK 2) In this video tutorial, see how to replace the timing belt on a second-generation Volvo V40, produced from 2012 to 2019. First, remove the timing bel…
In the 2012 Volvo V40, How to Reset the Service Light?
In the 2012 Volvo V40, How to Reset the Service Light?
Volvo V40 (2012-2019 / MK 2) Watch the short video above to get an idea of how, just like any other car, the engine oil change is performed on the 2012 Volvo V40. Any other inter…
How to Replace the Serpentine Belt of the Volvo V40
How to Replace the Serpentine Belt of the Volvo V40
Volvo V40 (1995-2012 / MK 1) In this guide, we will see the main instructions useful for removing and replacing the serpentine belt of the Volvo V40. First, open the bonnet and b…

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos