Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to deactivate the Start&Stop system of the Volvo C30

Model: Volvo C30 MK 1 - Years 2006-2013
Part: Onboard computer

Disabling the start and stop system of the Volvo C30 is a very simple and quick operation, as the same operation can also be performed on other vehicles not only from Volvo but also from other manufacturers. To perform this operation, we must turn on the vehicle's instrument panel and immediately press the button with the vehicle symbol. In the case of our Volvo, the button is located near the gear shift, while in other vehicles the button may be located on the central dashboard. This operation is not permanent, which means that the system will resume functioning at the next ignition.

Posted on 17 April 2025 by ScegliAuto

Video tutorial

Related tutorials

Resetting the Service Light on Volvo C30
Resetting the Service Light on Volvo C30
Volvo C30 (2006-2013 / MK 1) Briefly, here are the instructions on how to reset the service light for routine maintenance on the Volvo C30. First, get inside the vehicle and pres…
Resetting the Maintenance (Service) Light on Volvo C30
Resetting the Maintenance (Service) Light on Volvo C30
Volvo C30 (2006-2013 / MK 1) Today, we will look at the instructions that will allow us to reset the routine maintenance (service) light on the Volvo C30. First, get into the veh…
Replacing the Timing Belt on the Volvo C30
Replacing the Timing Belt on the Volvo C30
Volvo C30 (2006-2013 / MK 1) In this guide, follow the instructions necessary for removing and replacing the timing belt on the Volvo C30. First, lift the vehicle and loosen the …

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos