Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Volvo S60?

Model: Volvo S60 MK 2 - Years 2010-2018
Part: Service warning light

You can completely clear the Service light displayed on the instrument panel of the Volvo S60 by turning on the ignition, ensuring that the code T2 appears on the panel followed by its numerical value. Then, press the ignition button once without starting the engine, and simultaneously hold down the OK button located on the right side of the steering wheel. At the same time, keep the ignition button pressed, and you can continue holding these two buttons until a flashing 'i' appears on the panel; at this point, the buttons can be released when an audible signal is heard.

Posted on 10 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a Volvo S60
How to Reset the Service Light on a Volvo S60
Volvo S60 (2010-2018 / MK 2) To reset the service light on a Volvo S60, follow the steps shown in the video. First, turn on the ignition and repeatedly press the button next to t…
How to Reset the Service Light on a Volvo S60?
How to Reset the Service Light on a Volvo S60?
Volvo S60 (2010-2018 / MK 2) You can clear the Service light from the instrument cluster of the Volvo S60 by turning on the ignition and navigating through the menu using the lef…
How do you reset the Service light on the Volvo S60?
Volvo S60 (2010-2018 / MK 2) On the instrument panel of the Volvo S60, it will be possible to make the Service light disappear by turning on the instrument panel and navigating w…

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos