Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Front Wishbone

Model: Volvo V70 MK 2 - Years 2000-2007
Part: Control arm

The necessary tools are a ratchet spanner, a set of fixed spanners, and the original replacement arm. Lift the car on the ramp to access the underlying mechanics. Remove the wheel to access the faulty component. Remove the underbody shields. Once the broken wishbone is located, proceed to remove it by unscrewing all the bolts. Also remove the steering arm support by unscrewing the two bolts. Check the rest of the mechanics, particularly the vibration dampers that support the arms; replace them if necessary. Refit the new wishbone and the rest of the previously removed components.

Updated on 4 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble and replace the front headrest of the Volvo V70
How to disassemble and replace the front headrest of the Volvo V70
Volvo V70 (2007-2016 / MK 3) These short and simple steps will allow us to remove and eventually replace the headrest of the front seat of the Volvo V70. First, we access the bac…
Replacement of the turn signal switch of the Volvo V70
Replacement of the turn signal switch of the Volvo V70
Volvo V70 (2000-2007 / MK 2) In this guide, we will see the main instructions that will allow us to disassemble and replace the turn signal switch of the Volvo V70. First, we ope…
How to replace the front door lock on a Volvo V70?
How to replace the front door lock on a Volvo V70?
Volvo V70 (2000-2007 / MK 2) In this tutorial, we can see how to replace the front door lock in the Volvo V70, an extremely simple and quick operation. First, we open the door we…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos