Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Adjust the Handbrake on a Volvo 945

Model: Volvo Volvo Various
Part: Parking brake

In this tutorial, learn how to adjust the handbrake on a Volvo 945, a very simple and quick operation. First, park the vehicle on a flat surface with the first gear engaged, then go to the back seats and remove the ashtray from the centre console. Next, remove the cover by unlocking the clips with a small flat screwdriver, locate the adjustment nut, and turn it until you reach the desired tension level. Finally, test the new adjustment on a suitable road.

Posted on 5 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Adjust the Handbrake on a Volvo 850
How to Adjust the Handbrake on a Volvo 850
Volvo Volvo Various If you want to proceed with a DIY adjustment of the handbrake on your car, you can find the instructions and method to follow in the description belo…
How to Adjust the Handbrake on Volvo 960?
How to Adjust the Handbrake on Volvo 960?
Volvo Volvo Various You can adjust the handbrake on the Volvo 960 by opening the ashtray located in the lower rear part of the central armrest: once opened, you can leve…
How to Adjust the Handbrake on a Volvo 940
How to Adjust the Handbrake on a Volvo 940
Volvo Volvo Various The procedure to adjust the handbrake on a Volvo 940 is quite simple. This video tutorial will guide you through the process independently and in jus…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos