Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service lights on a Volvo

Model: Volvo Xc60 MK 1 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Service warning light

See other generations:
Video tutorial

On a Volvo, resetting the maintenance interval is done with the engine off. With the Volvo stationary, turn the ignition to the position without starting the engine. Press and hold the OK button on the steering wheel (or, on older versions, the TRIP button on the odometer).

While holding, turn the ignition to the next position; continue holding until the reset indicator (symbol i or triangle) appears, then release to confirm the reset. Turn off and turn on the ignition again to verify that the warning is no longer present.

If the Volvo is equipped with a Maintenance menu on the dashboard, enter the interval section and select Reset: confirm when prompted and repeat the check with the dashboard turned on. If confirmation fails, repeat following the order and timing.


Posted on 23 June 2026 by ScegliAuto


Related tutorials

Resetting Maintenance Reminder on Volvo XC60
Resetting Maintenance Reminder on Volvo XC60
Volvo Xc60 (2017-2026 / MK 2) Let's go over the steps needed to reset the maintenance reminder on the Volvo XC60. First, get in the vehicle and press and hold the reset button loc…
How to Reset the Service Light on a Volvo XC60
How to Reset the Service Light on a Volvo XC60
Volvo Xc60 (2008-2016 / MK 1) Today, let's go through the procedure and information related to resetting the service light for the routine maintenance oil change on the Volvo XC60…
Resetting the Service Light on a Volvo XC60
Resetting the Service Light on a Volvo XC60
Volvo Xc60 (2008-2016 / MK 1) Today we will look at the instructions for resetting the maintenance service light on a Volvo XC60. First, get in the vehicle and turn on the ignitio…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos