Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Volvo XC90?

Model: Volvo Xc90 - Years 2015-2026
Part: Service warning light

To reset the Service light on a Volvo XC90, press and hold the button located on the left spoke of the steering wheel while the instrument cluster is off. Continue holding the button, insert the ignition key, and then activate the engine with the appropriate button. The maintenance light will start flashing, and you can release the button when the light becomes steady. Once the process is complete, turn off the instrument cluster to confirm the reset of the maintenance light.

Posted on 21 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the Service warning light on the Volvo XC90?
How do you reset the Service warning light on the Volvo XC90?
Volvo Xc90 (2015-2026 / MK 2) On the Volvo XC90, the reset operation of the Service light is carried out by pressing and holding the - button located on the left side of the steer…
How do you reset the Service light on the Volvo XC90?
How do you reset the Service light on the Volvo XC90?
Volvo Xc90 (2015-2026 / MK 2) In the instrument panel of the Volvo XC90, you can reset the Service light by pressing and holding the button located on the left side of the steerin…
How to Reset the Service Light on the Volvo XC90?
How to Reset the Service Light on the Volvo XC90?
Volvo Xc90 (2015-2026 / MK 2) To begin resetting the Service light on the Volvo XC90, press and hold the button located on the left side of the steering wheel while the instrument…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos