Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volvo
    3. :
  3. V70
    4. : Dashboard moldings replacement

Volvo V70 - Video tutorial

Model: Volvo V70 MK 2 - Years 2000-2007
Part: Dashboard
Operation: Dashboard moldings replacement

Open the glovebox and unscrew the four torx screws fixing the edge trim molding: remove it and replace it with the briar effect one by tightening the relative fixing screws again. If you do not have the replacement molding, you can cover the original one with adhesive film: in fact, films with various effects (satin aluminum, carbon, briar) are available in the after market which allow you to cover internal and external parts of the car to give it a more elegant or sporty appearance depending on the result to be obtained.


Posted on 4 July 2023 by ScegliAuto



How to replace the front headlight bulbs in the Volvo V70?
Volvo V70 (2000-2007 / MK 2) In this tutorial, we can see how to replace the front headlight bulbs in the Volvo V70, an extremely simple and quick operation. First of all, make s
How to replace the headlight on the Volvo V70?
Volvo V70 (2000-2007 / MK 2) If we have to replace the headlight on this car, we can refer to the video images and the indications below: the first thing to do is to open the bon
How do you replace the radio of the Volvo V70?
Volvo V70 (2000-2007 / MK 2) In order to replace the car stereo of the Volvo V70, you need to pry with an object so that you can detach the cover around the device, in the centra

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos