Instructions for Removing the Handle

Model: Volvo Xc90 MK 1 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Handle

See other generations:

This video is currently unavailable

First, you need to remove the door panel: the first step is to take off the inner handle of the panel (a screwdriver is sufficient to pry it off); beneath the handle, there is a screw that must be removed. At this point, disconnect the pressure clips along the edge of the panel, the connectors, and the cable connected to the internal opening lever.

Once the panel is removed, you can unscrew the fastening screws of the inner handle: to remove it, you need to detach the trim around the handle itself. You can then proceed with the handle replacement and reassemble the panel by reconnecting the connectors and the cable.

Secure the pressure clips, the screw under the handle, and the handle itself.

Updated on 4 February 2026 by ScegliAuto

Other guides you may be interested in

Handle - Maintenance and repair on other vehicles

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!

by ScegliAuto

Instructions for Removing the Handle

Related tutorials

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

More videos