Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volvo
    3. :
  3. Xc90
    4. : Rear door panel removal instructions

Volvo Xc90 - Video tutorial

Model: Volvo Xc90 MK 1 - Years 2002-2014
Part: Door panel
Operation: Rear door panel removal instructions

Remove the aluminum coating from the handle of the internal handle and unscrew the screws underneath. Release the pressure clips along the edges of the panel by levering with a spatula; a release the catches, pull the panel upwards to remove it from the scraper seal, unhook the cable from the opening handle and the speaker socket. Before proceeding with the reassembly, check that all the pressure locks are present in their seats, re-attach the handle cable and the socket and then reposition the panel by re-engaging the pressure locks. Re-tighten the screws under the handle and replace the aluminum casing.


Posted on 8 July 2023 by ScegliAuto



How to disassemble the front door panel of the Volvo XC90
Volvo Xc90 (2015-2024 / MK 2) In a few simple steps, we will see how to disassemble the front door panel of the Volvo XC90, following the instructions below. First, open the front
How to remove the outside door handle on Volvo XC 90
Volvo Xc90 (2002-2014 / MK 1) In today's video we will see the main instructions for removing the external front door handle on a Volvo XC 90 first series. First we open the front
How do I remove the rear door panel from the Volvo XC90?
Volvo Xc90 (2015-2024 / MK 2) In order to remove the rear door panel of the Volvo XC90, the cover of the inside of the handrail, near the power window control panel, must be remov

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos