Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Painting Remote Key Housing

Model: Volvo Xc90 MK 1 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Key

See other generations:
Video tutorial

Modern ignition keys contain a remote system for opening doors but are made of thin plastic, making them quite delicate and prone to wear. If the key housing deteriorates, it can be repainted.

Disassemble the key into all its parts, set aside the electronics, battery, and silicone keypad. Thoroughly clean all plastic parts using a toothbrush and an alcohol-based solvent (no acetone).

Dry the parts thoroughly and place them on a surface protected by paper and away from dust. After shaking a spray paint can well, spray the various parts gently and evenly.

Do not overdo the paint to avoid unsightly drips. Once you are sure they are dry, reassemble the various parts.


Updated on 5 February 2026 by ScegliAuto


Related tutorials

How to replace the battery of the 2019 Volvo XC90 remote control
How to replace the battery of the 2019 Volvo XC90 remote control
Volvo Xc90 (2015-2026 / MK 2) To replace the battery of the 2019 Volvo XC90 remote control, we need a flathead screwdriver and a CR2032 battery. To replace the battery, we need to…
How to Change the Key Fob Battery on a Volvo XC90
How to Change the Key Fob Battery on a Volvo XC90
Volvo Xc90 (2015-2026 / MK 2) Below, we will go through the steps to disassemble and replace the battery in the key fob for the Volvo XC90. First, take your key fob and slide the …
How to Replace the Key Fob Battery of a Volvo XC90
How to Replace the Key Fob Battery of a Volvo XC90
Volvo Xc90 (2015-2026 / MK 2) To replace the battery in the key fob of a Volvo XC90, you will need a new battery of the correct type, specifically a flat CR 2032 3V battery, and a…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos