Do it yourself
Frequently asked questions about cars and motorcycles

How to Change the Key Fob Battery on a Volvo XC90

Model: Volvo Xc90 MK 2 - Years 2015-2026
Part: Key

Below, we will go through the steps to disassemble and replace the battery in the key fob for the Volvo XC90. First, take your key fob and slide the plastic cover down to remove it. Then, use a thin tool like a flathead screwdriver to unscrew the battery cover to access the compartment, as shown in the video. At this point, remove and replace the battery with a new one of the correct type and designation. Finally, reassemble the key fob!

Updated on 6 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Volvo Xc90 (2015-2026 / MK 2) To replace the battery of the 2019 Volvo XC90 remote control, we need a flathead screwdriver and a CR2032 battery. To replace the battery, we need to…
Volvo Xc90 (2015-2026 / MK 2) To replace the battery in your Volvo XC90 key fob, first detach the cover without the Volvo logo by pressing the unlock button located underneath the…
Volvo Xc90 (2015-2026 / MK 2) To replace the battery in a remote for a Volvo XC90, follow these simple instructions. Start by releasing the cover where the Volvo logo is located; …

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos