Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Key Fob Battery of a Volvo XC90

Model: Volvo Xc90 MK 2 - Years 2015-2026
Part: Key

To replace the battery in the key fob of a Volvo XC90, you will need a new battery of the correct type, specifically a flat CR 2032 3V battery, and a small flathead screwdriver. Take the key fob of your car and slide the lever on the metal latch at the end of the case to open one of the side covers of the fob, revealing the metal key inside. Flick the small lever located near the key to open the cover on the opposite side of the fob; at this point, remove the battery cover and proceed to extract and replace the battery.

Updated on 29 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the battery of the 2019 Volvo XC90 remote control
How to replace the battery of the 2019 Volvo XC90 remote control
Volvo Xc90 (2015-2026 / MK 2) To replace the battery of the 2019 Volvo XC90 remote control, we need a flathead screwdriver and a CR2032 battery. To replace the battery, we need to…
How to Change the Key Fob Battery on a Volvo XC90
How to Change the Key Fob Battery on a Volvo XC90
Volvo Xc90 (2015-2026 / MK 2) Below, we will go through the steps to disassemble and replace the battery in the key fob for the Volvo XC90. First, take your key fob and slide the …
Replacing the Key Fob Battery for the Volvo XC90
Replacing the Key Fob Battery for the Volvo XC90
Volvo Xc90 (2015-2026 / MK 2) To replace the battery in your Volvo XC90 key fob, first detach the cover without the Volvo logo by pressing the unlock button located underneath the…

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos