Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volvo
    3. :
  3. V40
    4. : Automatic parking via on-board computer

Volvo V40 - Video tutorial

Model: Volvo V40 MK 2 - Years 2012-2019
Part: -board computer
Operation: Automatic parking via on-board computer

Some cars are equipped with an automatic parking system. The device is equipped with cameras and software that allows you to park the car in full autonomy. Once the car is positioned in the parking area, the automatic control is activated and the maneuver can be followed via the display positioned on the dashboard. If the system detects any anomaly, or if it is impossible to park, a symbol with a red cross appears on the display and automatically stops movement. The cameras visualize the road even during normal driving of the car allowing a better visibility of the road.


Posted on 5 July 2023 by ScegliAuto



How to replace the automatic transmission oil in the Volvo V40?
Volvo V40 (2012-2019 / MK 2) In this tutorial, we can see how to replace the automatic transmission oil in the Volvo V40, a simple operation but one that requires good manual dex
How to reset the Volvo V40 service
Volvo V40 (2012-2019 / MK 2) .. amber yellow "i" will start flashing in the on-board computer and at that point we could release the "ok" key we were holding down. At this point the..
Where are the fuses of the Volvo V40 located?
Volvo V40 (2012-2019 / MK 2) In the Volvo V40, the fuses are divided within the three fuse boxes which are installed on the vehicle. The first of these three is located below the

How to activate the cruise control of the Nissan Qashqai

Let's see how the cruise control is activated on the Nissan Qashqai: you have to activate it by putting the cruise control switch to "on", then, using only the right spoke of the steering wheel, press the "set-" button, then the "res +" button also on the right spoke of the steering wheel and the cruise control indicator lights up on the car's instrument panel display. If the brake pedal is pressed while the cruise control is in operation or if the "cancel" button on the right spoke of the steering wheel is pressed, the cruise control will automatically deactivate and the cruise control indicator on the instrument panel will go out.

Watch the video!


by ScegliAuto

More videos