Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Ignition Coil Replacement

Model: Volvo Xc90 MK 1 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Ignition coil

See other generations:
Video tutorial

Obtain the correct replacement coil. You will need a few tools to access the coil replacement.

Start by removing the metal cover by unscrewing the relevant bolts. Disconnect the ignition coil connector and remove the two retaining bolts with a ratchet wrench, taking them out manually to avoid dropping them.

Now you can remove the coil by pulling it upward. Install the new coil, ensuring the high-voltage connectors are positioned correctly.

Reinstall the two retaining bolts and reconnect the power connector. Replace the spark plugs if necessary.

Perform a functionality test.


Updated on 5 February 2026 by ScegliAuto


Related tutorials

Instructions for Replacing Spark Plugs
Instructions for Replacing Spark Plugs
Volvo Xc90 (2002-2014 / MK 1) It is recommended to perform this maintenance operation with the engine cold to avoid unpleasant burns. To access the spark plugs, first remove the i…
Replacing Spark Plugs and Ignition System
Replacing Spark Plugs and Ignition System
Volvo Xc90 (2002-2014 / MK 1) Start by removing the engine cover using a ratchet wrench. To avoid mixing up the wires, disconnect only the first spark plug. Use a ratchet wrench t…
How to Reset the Service Light on a Volvo XC90
How to Reset the Service Light on a Volvo XC90
Volvo Xc90 (2002-2014 / MK 1) If the message regarding vehicle maintenance appears on the instrument cluster of your first-generation Volvo XC90, even though the service has alrea…

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos