Do it yourself
Frequently asked questions about cars and motorcycles

Rear Door Panel Removal

Model: Volvo S70 MK 1 - Years 1996-2000
Part: Door trim panel

Remove the protective cap inside the handle of the internal door and unscrew the underlying screw; remove the frame around the opening lever and, using a plastic lever, unclip the pressure clips along the edges of the panel and pull it upwards to detach it from the window seal. Then disconnect the window lift control connector and the courtesy light power connector. To install it, proceed in reverse: connect the plugs, align the lock in the appropriate hole, and fit the edge of the panel into the window seal; clip the pressure clips along the edges and tighten the fixing screw.

Updated on 6 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Volvo S70 (1996-2000 / MK 1) The tools required for this operation are: a flathead screwdriver, a T25 Torx key, and a trim tool. Remove the cover of the handle and unscrew the tw…
Volvo S70 (1996-2000 / MK 1) Replacing the external wing mirror requires removing the door panel to access the screws. Remove the panel using a screwdriver to unscrew the screws …
Volvo S70 (1996-2000 / MK 1) The switches for the electric window regulators often get damaged due to the acidity of hand sweat or the use of some cleaning products that are too …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos