Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the External Wing Mirror on a Volvo V50

Model: Volvo V50 MK 1 - Years 2004-2012
Part: Side mirror

Before you begin, open the front door of your Volvo V50. Start by unclipping and removing the window switch panel, then disconnect the corresponding electrical connector. Next, remove the door panel by unclipping and removing the inserts, unscrewing the fixing screws, and unclipping it from its housing. Once done, you will reach the nuts that secure the mirror to the door. Proceed by disconnecting the corresponding electrical connector, then unscrew and remove the fixing nuts. At this point, you can remove the external wing mirror, and the removal will be complete. To fit the new mirror, follow these instructions in reverse, and the replacement will be finished.

Updated on 14 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to remove the driver's side wing mirror on a Volvo V50
How to remove the driver's side wing mirror on a Volvo V50
Volvo V50 (2004-2012 / MK 1) How to remove the external wing mirror of a Volvo V50? Let's look at disassembling the mirror parts. Pry between the perimeter of the mirror frame an…
How to Remove the Wing Mirror on Volvo V50
How to Remove the Wing Mirror on Volvo V50
Volvo V50 (2004-2012 / MK 1) How do you remove the external mirror from a Volvo V50? Let’s see how to detach the mirror fixed in the housing. Pry between the perimeter of the mir…
Removing the Mirror from a Volvo V50
Removing the Mirror from a Volvo V50
Volvo V50 (2004-2012 / MK 1) Here’s how to remove the external mirror from a Volvo V50. Using a plastic-coated lever, pry between the perimeter of the mirror frame and the glass.…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos