Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the "Service" Light on a Volvo XC90

Model: Volvo Xc90 MK 1 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Service warning light

See other generations:
Video tutorial

Before you begin, sit in the driver's seat of your Volvo XC90. Start by turning the key in the ignition switch to the first position to activate the instrument cluster. Next, press and hold the lower left button on the instrument cluster while turning the key to the second position.

Keep holding the button until the orange triangle starts flashing. Once it starts flashing, release the button, then press and hold it again until you hear a brief beep.

At this point, release the button and turn off the instrument cluster, and you will have completed the reset.


Updated on 23 April 2026 by ScegliAuto


Related tutorials

How to reset the service light on the Volvo XC90
How to reset the service light on the Volvo XC90
Volvo Xc90 (2015-2026 / MK 2) After performing the maintenance service, it is necessary to reset the service light for the engine oil change; let's see the reset procedure on the …
How to Reset the Service Light on the Volvo XC90
How to Reset the Service Light on the Volvo XC90
Volvo Xc90 (2015-2026 / MK 2) Let's go over the steps to reset the service light for the routine oil change maintenance on the Volvo XC90. First, get inside the vehicle and turn o…
How to reset the service light on the Volvo XC90
How to reset the service light on the Volvo XC90
Volvo Xc90 (2015-2026 / MK 2) To complete the manual reset procedure of the service light on your second generation Volvo XC90, simply follow the steps outlined in the following g…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos