Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Door Panels on Volvo S60

Model: Volvo S60 MK 2 - Years 2010-2018
Part: Door trim panel

Open the rear door and remove the cover located on the side of the door that remains attached to the vehicle, then remove the underlying Torx screw. Similarly, remove the Torx screw located under the central handle. Done! Now, use a plastic trim tool (do not use metal tools as you risk scratching the door) to pry around the entire gap of the panel, pulling it out gradually. After doing this, disconnect the internal cables of the panel to remove it completely. This is a simple task that anyone can do.

Updated on 26 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the outer handle of the rear door of the Volvo S60
How to disassemble the outer handle of the rear door of the Volvo S60
Volvo S60 (2019-2026 / MK 3) In this guide, we will discover the useful instructions for disassembling and replacing the outer handle of the rear door of the Volvo S60. First, le…
How to Remove the Panel of a Volvo S60
How to Remove the Panel of a Volvo S60
Volvo S60 (2010-2018 / MK 2) How to remove the panel of a Volvo S60? Don't worry, let's see together in this video how to proceed. Before starting the disassembly, disconnect the…
How to Remove the Outer Door Handle of the Front Door on a Volvo S60
How to Remove the Outer Door Handle of the Front Door on a Volvo S60
Volvo S60 (2019-2026 / MK 3) This guide provides the main instructions on how to disassemble and replace the outer door handle of the front door on a Volvo S60. First, open the v…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos