Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volvo
    3. :
  3. V50
    4. : How to reset the Volvo V50 service

Volvo V50 - Video tutorial

Model: Volvo V50 MK 1 - Years 2004-2012
Part: -board computer
Operation: How to reset the Volvo V50 service

In today's video we see how to reset the Volvo V50 service. Let's start by getting into the car and position ourselves in front of the instrumentation. We hold down the button on the instrumentation and turn the ignition key. Now we wait until the light with the exclamation point flashes and then we release the button. We then turn off the car. Upon restart, the light should have gone out and you will no longer have the annoying service expired warning. This operation is necessary after having serviced your car, to confirm that the service has been carried out.


Posted on 6 April 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos