Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volvo
    3. :
  3. V50
    4. : How to reset the service in the Volvo V50?

Volvo V50 - Video tutorial

Model: Volvo V50 MK 1 - Years 2004-2012
Part: Checks and maintenance
Operation: How to reset the service in the Volvo V50?

In this tutorial we can see how to reset the service in the Volvo V50, a very simple and fast operation. Obviously, before doing this, we will have to complete all the maintenance work required. To reset, close all the doors, insert the key and turn it to the first position. Subsequently, we hold down the button located under the tachometer and, within 2 seconds, we turn on the ignition by turning the key to the second position. At this point, keep the key pressed until the "i" above the display stops flashing, and then disappears completely.


Posted on 18 April 2024 by ScegliAuto

    Frequently Asked Questions

    • V50 2004-2012 - Why doesn't the rear trunk of my Volvo V50 open? Read Answer
    • V50 2004-2012 - What is the problem with the immobilizer on the Volvo V50? Read Answer
    • V50 2004-2012 - How to reset the service on the Volvo V50? Read Answer
    • V50 2004-2012 - What is the range of the Volvo V50? Read Answer
    • V50 2004-2012 - How much does the Volvo V50 service cost? Read Answer
    • V50 2004-2012 - How many km do you need a service on a Volvo V50? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos