Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Key Fob Battery on the Volvo V90

Model: Volvo V90 MK 1 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Key

Video tutorial

To replace the battery in the remote key fob, follow these steps: Take the remote and slide the back cover off by pressing with your finger. Underneath, you will find the emergency key; remove it and use it to release the locking tab of the other cover.

Get a small screwdriver to turn the small circular cover located above the battery compartment. Then, remove the battery and take the new one. Always pay attention to the orientation of the battery; the positive terminal should always be on top. Finally, reassemble the key fob covers.


Updated on 18 May 2026 by ScegliAuto


Related tutorials

How to Replace the Battery in the Volvo V90?
How to Replace the Battery in the Volvo V90?
Volvo V90 (2016-2024 / MK 1) You can replace the battery in the Volvo V90 by opening the rear compartment to access the components inside the engine bay: here you will find the c…
How to Reset the Onboard Computer in a Volvo V90?
How to Reset the Onboard Computer in a Volvo V90?
Volvo V90 (2016-2024 / MK 1) In this tutorial, you will see how to reset the onboard computer in a Volvo V90, a very simple and quick operation to perform, for example, as an att…
How to reset the service light in the Volvo V90?
How to reset the service light in the Volvo V90?
Volvo V90 (2016-2024 / MK 1) In this tutorial we can see how to reset the service in the Volvo V90, an extremely simple and quick operation, to be carried out only once all sched…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos