Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlamp Bulb of the Volvo V40

Model: Volvo V40 MK 2 - Years 2012-2019
Part: Headlight bulb

Here’s how to quickly and safely replace the front headlamp bulb of the Volvo V40. Before you begin, remember that this maintenance task must be performed with the vehicle completely switched off. Go to the front of the vehicle and lift the bonnet. Remove the safety rubber grommets and unscrew all the screws holding the headlamp in place using a Torx spanner. Once done, gently pull the headlamp towards you and disconnect the electrical connector. At this point, simply replace the faulty bulb with a new one and reassemble everything correctly.

Updated on 19 May 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Replace the Front Headlamp Bulb on a Volvo V40
How to Replace the Front Headlamp Bulb on a Volvo V40
Volvo V40 (2012-2019 / MK 2) To replace the front headlamp bulb on a Volvo V40, open the bonnet to access the screws securing the headlamp unit from the top: once these screws ar…
How to Remove the Rear Light on the Volvo V40?
How to Remove the Rear Light on the Volvo V40?
Volvo V40 (2012-2019 / MK 2) To remove the rear light on the Volvo V40, open the boot and detach the internal cover of the pillar corresponding to the light to be removed. This w…
How to replace the front headlights in the Volvo V40?
How to replace the front headlights in the Volvo V40?
Volvo V40 (2012-2019 / MK 2) In this tutorial, we can see how to replace the front headlights on the Volvo V40, an extremely simple and quick operation. First of all, make sure t…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos