Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Reset the Engine Oil Light on the Volvo XC60

Model: Volvo Xc60 MK 1 - Years 2008-2016
Part: Service warning light

Follow this guide to reset the engine oil light on the Volvo XC60 in simple and quick steps. First, get in the vehicle and turn on the ignition by pressing the start button once; then press and hold the "ok" button located on the left stalk of the turn signals until the light starts flashing on the instrument panel, as shown in the video. At this point, follow the indicated procedure and confirm the reset of the light from the instrument panel (the option will appear on the display). Finally, turn off and then restart the engine!

Updated on 20 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Resetting the Service Light on the Volvo XC60
Resetting the Service Light on the Volvo XC60
Volvo Xc60 (2008-2016 / MK 1) Follow the procedure to reset the service light for the regular maintenance of the engine oil change on the Volvo XC60. First, get in the vehicle and…
How to Reset the Service Light on a Volvo XC60
How to Reset the Service Light on a Volvo XC60
Volvo Xc60 (2008-2016 / MK 1) Below are the instructions on how to perform routine maintenance by replacing the engine oil and oil filter on the Volvo XC60. Before resetting the s…
Resetting the Oil Change Service Light on the Volvo XC60
Resetting the Oil Change Service Light on the Volvo XC60
Volvo Xc60 (2008-2016 / MK 1) This guide will allow you to reset the service light for the routine maintenance oil change on the Volvo XC60. First, get inside the vehicle and pres…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos