Do it yourself
Frequently asked questions about cars and motorcycles

Cylinder Head Gasket Replacement

Model: Volvo S70 MK 1 - Years 1996-2000
Part: Engine

When replacing the cylinder head gasket, it is always advisable to have the head skimmed to eliminate any warping caused by overheating; after skimming, check the flatness of the surface using a straight edge and a feeler gauge; repeat the same check on the cylinder block; re-tap the threads of the head fixing holes and check the piston protrusion with a digital height gauge; then insert the gasket and the head, tightening the respective fixing bolts in a cross pattern using both a torque wrench and a standard spanner.

Updated on 12 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Volvo S70 (1996-2000 / MK 1) The heart of the engine is the car gasket that encloses the movement of the pistons, preventing oil from coming into contact with water. These gasket…
Volvo S70 (1996-2000 / MK 1) This video demonstrates how to replace the valve stem seals on the engine of a Volvo S70. In the video, the cylinder head is already removed and read…
Volvo S70 (1996-2000 / MK 1) The switches for the electric window regulators often get damaged due to the acidity of hand sweat or the use of some cleaning products that are too …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos