|
Do it yourself
| |||
| ||||
|
Inserting the new oil seal into the camshaft housing is a straightforward but delicate operation as it must not be deformed. Once the oil seal housing is thoroughly cleaned, lubricate both the housing and the new oil seal with clean oil, ensuring the sealing lip faces inwards; after positioning the oil seal, press it in fully using the appropriate tool. Proceed to install the pulleys, ensuring to keep the timing references aligned using the specific locking tool.
Updated on 13 February 2026 by ScegliAuto
Video tutorial
Related tutorials
Volvo S70
(1996-2000 /
MK 1)
Wear of the so-called tappet cups is quite common due to continuous friction with the cam lobes of the camshaft. Once the seats of the cups are thoro…
Volvo S70
(1996-2000 /
MK 1)
When replacing the rocker cover gasket, it is very important to thoroughly clean the gasket seat on both the cylinder head side and the cover side, r…
Volvo S70
(1996-2000 /
MK 1)
This video demonstrates how to replace the valve stem seals on the engine of a Volvo S70. In the video, the cylinder head is already removed and read…
Other guides you may be interested in |
How to Check the Oil Level on a Jeep Renegade?
To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.526
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |