Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Parking Brake

Model: Volvo Xc90 MK 1 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Parking brake

See other generations:
This video is currently unavailable

The parking brake is a very important component of the car, especially when parking or stopping on an uneven surface. If you have good manual skills, you do not need to go to a specialized shop and can proceed on your own. Carefully remove the broken cable, and following the reverse procedure used to take out the broken cable, install the new one. Once everything is mounted, it is advisable to have the car tested to ensure that the entire procedure has been performed correctly.


Updated on 13 February 2026 by ScegliAuto


Related tutorials

How to Adjust the Parking Brake Cable on the Volvo XC 90
How to Adjust the Parking Brake Cable on the Volvo XC 90
Volvo Xc90 (2002-2014 / MK 1) Follow these steps to adjust the parking brake and its cable on the Volvo XC 90. First, get inside the vehicle and remove the parking brake boot by p…
How to Adjust the Handbrake on the Volvo XC90?
How to Adjust the Handbrake on the Volvo XC90?
Volvo Xc90 (2002-2014 / MK 1) To adjust the handbrake on the Volvo XC90, you need to remove the left side protection panel of the center tunnel on the driver's side. Once this pan…
How to Adjust the Parking Brake on a Volvo XC90?
How to Adjust the Parking Brake on a Volvo XC90?
Volvo Xc90 (2002-2014 / MK 1) To adjust the parking brake on a Volvo XC90, remove the protective panel on the left side of the center tunnel. Access this panel from the driver's f…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos