Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Adjust the Parking Brake Cable on the Volvo XC 90

Model: Volvo Xc90 MK 1 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Checks and maintenance

See other generations:
Video tutorial

Follow these steps to adjust the parking brake and its cable on the Volvo XC 90. First, get inside the vehicle and remove the parking brake boot by pulling it off from the bottom. Next, use a socket wrench to loosen or tighten the parking brake cable adjuster, removing the metal clip first, as shown in the video.

Ensure that the rear brake pads are in good condition; if necessary, adjust the brakes on the rear as well!


Updated on 29 June 2026 by ScegliAuto


Related tutorials

How to Adjust the Handbrake on the Volvo XC90?
How to Adjust the Handbrake on the Volvo XC90?
Volvo Xc90 (2002-2014 / MK 1) To adjust the handbrake on the Volvo XC90, you need to remove the left side protection panel of the center tunnel on the driver's side. Once this pan…
How to Adjust the Parking Brake on a Volvo XC90?
How to Adjust the Parking Brake on a Volvo XC90?
Volvo Xc90 (2002-2014 / MK 1) To adjust the parking brake on a Volvo XC90, remove the protective panel on the left side of the center tunnel. Access this panel from the driver's f…
How to Adjust the Parking Brake on a Volvo XC90?
How to Adjust the Parking Brake on a Volvo XC90?
Volvo Xc90 (2002-2014 / MK 1) In this tutorial, you will see how to adjust the parking brake on a Volvo XC90, a very simple operation. First, position yourself in the back seat, t…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos