Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the 2002 Volvo S40

Model: Volvo S40 MK 1 - Years 1995-2004
Part: Service warning light

If you own a Volvo S40 Mk1 (2002) and want to know how to manually reset the service light that remains illuminated on the dashboard, follow these steps. First, ensure your car is completely off, then locate the button at the bottom left of the speedometer and hold it down. At the same time, turn the key and switch on the ignition. Once the service light begins to flash, release the button and press the one located below the fuel gauge. Finally, turn off the ignition.

Updated on 20 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a Volvo S40
How to Reset the Service Light on a Volvo S40
Volvo S40 (2004-2012 / MK 2) Here is the standard method for resetting the maintenance light on second-generation Volvo S40s: ensure that the car is completely off, without inser…
How to Reset the Engine Warning Light on the Volvo S40
How to Reset the Engine Warning Light on the Volvo S40
Volvo S40 (1995-2004 / MK 1) In this brief guide, we will see the instructions to reset the engine warning light on the Volvo S40. First, get inside the cabin and start the ignit…
Where is the OBD port of the Volvo S40 located?
Where is the OBD port of the Volvo S40 located?
Volvo S40 (1995-2004 / MK 1) To gain free access to the OBD port of your first-generation Volvo S40, simply follow the procedure described in the following guide. First, you need…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos