Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service light on a 2013 Volvo V70?

Model: Volvo V70 MK 3 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Service warning light

See other generations:
Video tutorial

After a brief introduction, the YouTuber shows how to reset the service light on a 2013 Volvo V70. The first step is to turn on the ignition and then use the dial on the left lever of the steering wheel until the dashboard display shows the T2 screen followed by two numerical values (indicating the mileage).

At this point, press the start/stop button, wait a few seconds, and press it again.

Now, simultaneously hold down this same button and the one labelled "OK" on the lever used earlier. When the displayed screen changes, release the start/stop button while keeping the other button pressed until the indicator light on the display stops flashing.


Updated on 27 June 2026 by ScegliAuto


Related tutorials

How to reset the "Service" light on a Volvo V70?
How to reset the "Service" light on a Volvo V70?
Volvo V70 (2000-2007 / MK 2) Hello! Today, reset the "Service" light on your Volvo V70. Before starting, ensure you have completed the recommended service. Begin by sitting in th…
Resetting the service light on the Volvo V70.
Resetting the service light on the Volvo V70.
Volvo V70 (2007-2016 / MK 3) Below we will discover the instructions that will allow us to reset the service maintenance light of the Volvo V70. First, we get into the car and st…
How to reset the service light on the Volvo V70?
How to reset the service light on the Volvo V70?
Volvo V70 (2007-2016 / MK 3) Today, we will discover the steps and instructions that will allow us to reset the service and routine maintenance light on the Volvo V70. First, get…

Other guides you may be interested in

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos