Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light in the Volvo XC90?

Model: Volvo Xc90 MK 1 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Service warning light

See other generations:
Video tutorial

In this tutorial, we will see how to reset the service light in the Volvo XC90. Before performing this simple operation, make sure you have completed all scheduled maintenance work. Start by inserting the key but leave it in the position 0, then press the indicated button located under the speedometer while simultaneously turning on the instrument cluster.

At this point, keep the button pressed for about 10 seconds, or until the center light starts to flash. Finally, restart the instrument cluster and verify that the procedure was completed correctly.


Updated on 7 July 2026 by ScegliAuto


Related tutorials

How to reset the service light on the Volvo XC90
How to reset the service light on the Volvo XC90
Volvo Xc90 (2015-2026 / MK 2) After performing the maintenance service, it is necessary to reset the service light for the engine oil change; let's see the reset procedure on the …
How to Reset the Service Light on the Volvo XC90
How to Reset the Service Light on the Volvo XC90
Volvo Xc90 (2015-2026 / MK 2) Let's go over the steps to reset the service light for the routine oil change maintenance on the Volvo XC90. First, get inside the vehicle and turn o…
How to reset the service light on the Volvo XC90
How to reset the service light on the Volvo XC90
Volvo Xc90 (2015-2026 / MK 2) To complete the manual reset procedure of the service light on your second generation Volvo XC90, simply follow the steps outlined in the following g…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos