Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Volvo XC60

Model: Volvo Xc60 MK 1 - Years 2008-2016
Part: Service warning light

To reset the Oil Service light on a Volvo XC60, press and hold the accelerator and brake pedals simultaneously while the instrument cluster is off. While holding both pedals, insert the ignition key into the ignition switch and wait for the instrument cluster to light up. At this point, continue holding the pedals for a few seconds until the Oil Service light is completely reset. Once the reset is complete, you can turn off the instrument cluster.

Updated on 12 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a Volvo XC60
How to Reset the Service Light on a Volvo XC60
Volvo Xc60 (2008-2016 / MK 1) Below are the instructions on how to perform routine maintenance by replacing the engine oil and oil filter on the Volvo XC60. Before resetting the s…
How to Reset the Service Light on a Volvo XC60?
How to Reset the Service Light on a Volvo XC60?
Volvo Xc60 (2017-2026 / MK 2) To reset the Service light on a Volvo XC60, completely turn off the instrument cluster. Then, press and hold the down arrow button located on the lef…
How to Reset the Service Light in the Volvo XC60?
How to Reset the Service Light in the Volvo XC60?
Volvo Xc60 (2017-2026 / MK 2) Let's see how to reset the service light in the Volvo XC60 DIY, without using any external tools connected to the vehicle. The attached video tutoria…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos