Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Headlamp Bulb on a Volvo XC 70

Model: Volvo Xc70 MK 3 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Headlight bulb

See other generations:
Video tutorial

In this video tutorial, see how to replace the headlamp bulb on a Volvo XC 70. First, enter the vehicle, engage the handbrake, switch off the ignition, and pull the lever to lift the bonnet; once the bonnet is raised, secure it with the prop rod. Remove the headlamp retaining clips and, using both hands, pull the headlamp from its housing, then disconnect the electrical connector.

Next, move the headlamp to a flat surface for easier handling.

At this point, rotate the headlamp so the rear is facing you and release the cover latch, then use a screwdriver to lift the cover. You now have access to the bulb that needs replacing, so remove it from its socket and disconnect the electrical connector.

Insert the new bulb and reassemble all parts in reverse order.


Updated on 16 July 2026 by ScegliAuto


Related tutorials

How to Remove the Front Headlamp of the Volvo XC70
Volvo Xc70 (2007-2016 / MK 3) Remove and lift the front bonnet of the car, then locate the metal clips above the front of the headlamp. Once you have removed the two metal clips, …
How to replace the position light on the Volvo XC70
How to replace the position light on the Volvo XC70
Volvo Xc70 (2007-2016 / MK 3) This guide shows how to replace the bulb of the position lights on the Volvo XC70. The first step is to open the bonnet and remove the two metal clip…
Removing the Headlight Bulbs on a Volvo XC70
Removing the Headlight Bulbs on a Volvo XC70
Volvo Xc70 (2000-2007 / MK 2) Remove the blown bulbs from your Volvo XC70. Open the front bonnet by pulling the lever located at the bottom right of the dashboard, and secure it w…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos