Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Headlight Bulbs on a Volvo XC70

Model: Volvo Xc70 MK 2 - Years 2000-2007
Part: Headlight bulb

Remove the blown bulbs from your Volvo XC70. Open the front bonnet by pulling the lever located at the bottom right of the dashboard, and secure it with the prop rod. Remove the inspection cap from the headlight if fitted. At this point, you will find the bulbs with metal clips; pull the bulb holders out of the headlight and extract the damaged bulbs using a screwdriver. Fit the new bulbs (ensuring they are the correct type and size) and insert the bulb holder back into the headlight housing. Refit the cap covering the headlight and test the bulbs. If they do not work, remove them.

Updated on 15 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Headlamp of the Volvo XC70
Volvo Xc70 (2007-2016 / MK 3) Remove and lift the front bonnet of the car, then locate the metal clips above the front of the headlamp. Once you have removed the two metal clips, …
Replacing Rear Light Bulbs on a Volvo V70
Replacing Rear Light Bulbs on a Volvo V70
Volvo Xc70 (2000-2007 / MK 2) See how to replace the rear light bulbs on a Volvo V70. Open and lift the boot lid. Using a screwdriver, remove the plastic panel covering the rear l…
Replacement of the rear headlight bulbs of the Volvo XC70.
Replacement of the rear headlight bulbs of the Volvo XC70.
Volvo Xc70 (2007-2016 / MK 3) Below we will see the information that will allow us to disassemble and replace the bulbs of the rear headlight of the Volvo XC70. First, we open the…

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos