Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Front Headlamp of the Volvo XC70

Model: Volvo Xc70 MK 3 - Years 2007-2016
Part: Headlight

Remove and lift the front bonnet of the car, then locate the metal clips above the front of the headlamp. Once you have removed the two metal clips, pull the front headlamp out from the bodywork. Disconnect the bulb holders from the headlamp and extract the damaged bulbs using a screwdriver. Install the new bulbs (connect the control unit to the connector) and insert the bulb holder into the headlamp housing. Secure the headlamp to the front of the car and tighten it with the clips.

Updated on 7 April 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Volvo Xc70 (2007-2016 / MK 3) Below we will see the information that will allow us to disassemble and replace the bulbs of the rear headlight of the Volvo XC70. First, we open the…
Volvo Xc70 (2000-2007 / MK 2) Today, we will go through the steps to remove and replace the rear light on the Volvo XC70. First, open the tailgate and start unscrewing the fixing …
Volvo Xc70 (2007-2016 / MK 3) Today's guide will show us the main steps to disassemble and replace the timing belt of the Volvo XC70. First, we open the hood and start disassembli…

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos