Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Volvo
  4. :
  5. Xc90
  6. : How to reset the service light on Volvo Xc90

Volvo Xc90 - Video tutorial

Model: Volvo Xc90 MK 1 - Years 2002-2014
Part: Instrument cluster
Operation: How to reset the service light on Volvo Xc90

When the engine oil and filter are replaced on this car model, we must then proceed to reset the service light which we will find lit on the instrument panel which in this car is identified by the yellow triangle with the exclamation point. In the description below we will find the info on how to reset this spy and we can also help ourselves with the images of the video. After gaining access to the passenger compartment, locate the button located on the lower left-hand side of the instrument panel. Then press this button and hold it down to then immediately turn on the ignition, after which the service warning light will start flashing and then go off.


Posted on 4 June 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos