Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Perform an Oil Change (Oil and Filter Replacement) on a Volvo XC90

Model: Volvo Xc90 MK 1 - Years 2002-2014
Part: Engine oil

First, remove the old oil filter and replace it with the new one; to do this, unscrew the black cap containing the filter using a 27mm wrench and pull out the old cartridge. Insert the new one, place the new gasket on the cap, and screw it back in. Next, drain the oil from the oil pan by removing the drain bolt. Once done, screw it back in and tighten it securely with the appropriate wrench. Now, you can add new oil following the instructions in the owner's manual (regarding the necessary quantity and type of oil). Start the engine for a few seconds, then turn it off, check the oil level with the dipstick, and if it is within the limits, you are finished.

Updated on 10 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the engine oil change indicator on the Volvo XC90
How to reset the engine oil change indicator on the Volvo XC90
Volvo Xc90 (2015-2026 / MK 2) Through today's instructions, we will see how to reset the maintenance light for the oil change of the Volvo XC90. First of all, we get on board the …
How to reset the service light on the Volvo XC90
How to reset the service light on the Volvo XC90
Volvo Xc90 (2015-2026 / MK 2) After performing the maintenance service, it is necessary to reset the service light for the engine oil change; let's see the reset procedure on the …
How to reset the oil change for the Volvo XC90
How to reset the oil change for the Volvo XC90
Volvo Xc90 (2002-2014 / MK 1) In this article, with the support of the video tutorial, we will see how to reset the maintenance light of the Volvo XC90, which in this vehicle also…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos