Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volvo
    3. :
  3. S40
    4. : How do you replace the rear shock absorber of the Volvo S40?

Volvo S40 - Video tutorial

Model: Volvo S40 MK 2 - Years 2004-2012
Part: Shock absorbers
Operation: How do you replace the rear shock absorber of the Volvo S40?

In order to replace the rear shock absorber of the Volvo S40, you need to lift the car so that the corresponding wheel is not in contact with the ground. Once lifted, you will need to unscrew the bolts that secure that wheel and remove it completely, in order to gain access to the components in its rear part. At this point, you will need to loosen the screws that secure the shock absorber at the top and bottom, at the level of the half shaft. After the screws have been loosened, it will be possible to remove the shock absorber and replace it with a new one.


Posted on 7 July 2023 by ScegliAuto



Adjustment of the handbrake of the Volvo S40
Volvo S40 (2004-2012 / MK 2) Let's briefly see in this guide how to adjust the handbrake of the Volvo S40, in simple and quick steps. First, we get into the car and start by remo
Where is the fuel filter located in the Volvo S40?
Volvo S40 (1995-2004 / MK 1) In this video we can see where the fuel filter is located in the Volvo S40 and how to proceed in case we need to replace it. As shown, the filter is
How do you replace the Volvo S40 door panel?
Volvo S40 (2004-2012 / MK 2) In order to replace the door panel of the Volvo S40, first of all you need to loosen the five screws that fix the panel: these are located in the sea

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos