Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volvo
    3. :
  3. Xc60
    4. : What is the fuse diagram for the Volvo XC60?

Volvo Xc60 - Video tutorial

Model: Volvo Xc60 MK 2 - Years 2017-2024
Part: Fuse box
Operation: What is the fuse diagram for the Volvo XC60?

If the devices in our Volvo XC60 have suddenly stopped working, the first thing we can do is check the status of the corresponding fuses, whose diagrams are indicated in this video. We find the first box inside the passenger compartment, specifically in the lower area of the dashboard on the passenger side. The second box is located inside the engine compartment, below the black plastic cover next to the battery, while the third and final box is located in the right wall of the trunk. Make sure to replace the faulty fuses with equivalent spare parts.


Posted on 1 September 2023 by ScegliAuto

    Frequently Asked Questions

    • Xc60 2017-2024 - Where are the fuses for the electrical sockets of the Volvo XC60 located? Read Answer
    • Xc60 2017-2024 - Where is the fuse box located in the Volvo Xc60? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos