Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Filter in a Volvo S80

Model: Volvo S80 MK 2 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Cabin air filter

See other generations:
Video tutorial

This tutorial shows how to replace the cabin filter in a Volvo S80, a very simple and quick operation. First, open the passenger door, then locate the two screws beneath the glove compartment and remove them using a Torx T25 key. Next, remove the plastic panel, disconnect the courtesy light connector, and unclip the side panel of the tunnel.

At this point, you can open the long rectangular cover, remove the old filter, and insert the replacement. To reassemble everything, simply follow the reverse procedure.


Updated on 15 August 2026 by ScegliAuto


Related tutorials

Where is the Fuse Box Located on a Volvo S80
Volvo S80 (2006-2016 / MK 2) In this mini guide dedicated to your second-generation Volvo S80, we will discover where the fuse box containing all the various fuses is located. Wi…
Resetting the Service Light on the Volvo S80
Resetting the Service Light on the Volvo S80
Volvo S80 (1999-2006 / MK 1) In this guide, you will find instructions to reset the maintenance service light on the Volvo S80. First, get into the vehicle and start the instrume…
How to Replace the Timing Belt on a Volvo S80
How to Replace the Timing Belt on a Volvo S80
Volvo S80 (1999-2006 / MK 1) To replace the timing belt on a Volvo S80, open the bonnet and detach the cover on the left side of the engine block. You will also need to loosen th…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos