Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service light on a Volvo V40?

Model: Volvo V40 MK 2 - Years 2012-2019
Part: Service warning light

The vehicle used for this video is a 2016 Volvo V40. However, the service light reset procedure is identical for all models produced and sold between 2012 and 2019. How is it done? It is quite simple as it involves only three buttons and does not require professional tools. The buttons to press simultaneously are the OK button, the reset button, and the start button. Release these three buttons when the "I" light starts flashing on the display. The procedure is complete, and to verify it has been successful, simply hold down the OK button.

Updated on 23 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on the Volvo V40?
How to Reset the Service Light on the Volvo V40?
Volvo V40 (2012-2019 / MK 2) To reset the Service light on the Volvo V40, turn on the instrument cluster by turning the key in the lock and then press and hold the OK button loca…
How to Reset the Service Light on a Volvo V40?
How to Reset the Service Light on a Volvo V40?
Volvo V40 (2012-2019 / MK 2) On the Volvo V40, the Service light can be reset by turning on the ignition, rotating the key, and then pressing and holding the OK button located at…
How to reset the Service light on the Volvo V40?
How to reset the Service light on the Volvo V40?
Volvo V40 (2012-2019 / MK 2) To reset the Service light on the Volvo V40, turn the ignition on by rotating the key. Then, press and hold the OK button located at the end of the l…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos