Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the Volvo S90

Model: Volvo S90 MK 1 - Years 2017-2024
Part: Service warning light

To reset the Service light on the Volvo S90, press and hold the button located on the left spoke of the steering wheel while the instrument cluster is off. Continue holding this button, then turn on the instrument cluster by pressing the appropriate button. Once the cluster is on, you will notice a flashing 'i' on the instrument cluster: when it turns off completely, you can release the button, and the Service light will be reset. Finally, you can turn off the instrument cluster.

Updated on 25 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the tire pressure light in the Volvo S90?
How to reset the tire pressure light in the Volvo S90?
Volvo S90 (2017-2024 / MK 1) In this tutorial, we can see how to reset the tire pressure light in the Volvo S90, an extremely simple and quick operation, to be carried out only o…
How to Reset the Service Light on the Volvo S90?
How to Reset the Service Light on the Volvo S90?
Volvo S90 (2017-2024 / MK 1) .. In this tutorial, you will see how to reset the service light on the Volvo S90, a very simple and quick operation to be performed only.. …
How to reset the Service light of the Volvo S90?
How to reset the Service light of the Volvo S90?
Volvo S90 (2017-2024 / MK 1) The procedure to reset the Service light on the instrument panel of the Volvo S90 is performed by holding down the button - located on the left spoke…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos